Параметры транспорта

Transport is for how V2Ray sends and receives data from its peers. The responsibility of a transport is to reliably transfer data to a peer. Usually a connection has matching transports on both endpoints. For example, if a V2Ray outbound uses WebSocket as its transport, the inbound it talks to also has to use WebSocket, otherwise a connection can't be established.

The transport settings devides into two parts: global settings and per proxy settings. Per-proxy settings specifies how each individual proxy handles its data, while global settings is for all proxies. Usually the inbound and outbound proxies between the connecting peer must have the same transport settings. When a proxy has no transport settings, the global settings applies.

TransportObject

TransportObject is used as transport field in top level configuration.

{
  "tcpSettings": {},
  "kcpSettings": {},
  "wsSettings": {},
  "httpSettings": {},
  "dsSettings": {},
  "quicSettings": {}
}

tcpSettings: TcpObject

Settings for TCP transport.

kcpSettings: KcpObject

Settings for mKCP transport.

wsSettings: WebSocketObject

Settings for WebSocket transport.

httpSettings: HttpObject

Settings for HTTP/2 transport.

dsSettings: DomainSocketObject

Settings for Domain Socket transport.

quicSettings: QUICObject

(V2Ray 4.7+) Settings for QUIC transport.

StreamSettingsObject

Each inbound and outbound proxy may has its own transport settings, as specified in streamSettings field in top level configuration.

{
  "network": "tcp",
  "security": "none",
  "tlsSettings": {},
  "tcpSettings": {},
  "kcpSettings": {},
  "wsSettings": {},
  "httpSettings": {},
  "dsSettings": {},
  "quicSettings": {},
  "sockopt": {
    "mark": 0,
    "tcpFastOpen": false,
    "tproxy": "off"
  }
}

network: "tcp" | "kcp" | "ws" | "http" | "domainsocket" | "quic"

Network type of the stream transport. Default value "tcp".

security: "none" | "tls"

Type of security. Choices are "none" (default) for no extra security, or "tls" for using TLS.

tlsSettings: TLSObject

TLS settings. TLS is provided by Golang. Support up to TLS 1.2. DTLS is not supported.

tcpSettings: TcpObject

TCP transport configuration for current proxy. Effective only when the proxy uses TCP transport. Configuration is the same as it is in global configuration.

kcpSettings: KcpObject

mKCP transport configuration for current proxy. Effective only when the proxy uses mKCP transport. Configuration is the same as it is in global configuration.

wsSettings: WebSocketObject

WebSocket transport configuration for current proxy. Effective only when the proxy uses WebSocket transport. Configuration is the same as it is in global configuration.

httpSettings: HttpObject

HTTP/2 transport configuration for current proxy. Effective only when the proxy uses HTTP/2 transport. Configuration is the same as it is in global configuration.

dsSettings: DomainSocketObject

Domain socket transport configuration for current proxy. Effective only when the proxy uses domain socket transport. Configuration is the same as it is in global configuration.

quicSettings: QUICObject

(V2Ray 4.7+) QUIC transport configuration for current proxy. Effective only when the proxy uses QUIC transport. Configuration is the same as it is in global configuration.

sockopt: SockoptObject

Socket options for incoming and out-going connections.

TLSObject

{
  "serverName": "v2ray.com",
  "allowInsecure": false,
  "alpn": ["http/1.1"],
  "certificates": [],
  "disableSystemRoot": false
}

serverName: string

Server name (usually domain) used for TLS authentication. Typically this is used when corressponding inbound/outbound uses IP for communication.

When domain name is specified from inbound proxy, or get sniffed from the connection, it will be automatically used for connection. It is not necessary to set serverName in such case.

alpn: [ string ]

An array of strings, to specifiy the ALPN value in TLS handshake. Default value is ["http/1.1"].

allowInsecure: true | false

If true, V2Ray allowss insecure connection at TLS client, e.g., TLS server uses unverifiable certificates.

allowInsecureCiphers: true | false

Whehter or not to allow insecure cipher suites. By default TLS only uses cipher suites from TLS 1.3 spec. Turn on this option to allow cipher suites with static RSA keys.

disableSystemRoot: true | false

(V2Ray 4.18+) Whether or not to disable system root CAs for TLS handshake. Default value is false. If set to true, V2Ray will use only certificates for TLS handshake.

certificates: [ CertificateObject ]

List of TLS certificates. Each entry is one certificate.

CertificateObject

{
  "usage": "encipherment",

  "certificateFile": "/path/to/certificate.crt",
  "keyFile": "/path/to/key.key",

  "certificate": [
    "-----BEGIN CERTIFICATE-----",
    "MIICwDCCAaigAwIBAgIRAO16JMdESAuHidFYJAR/7kAwDQYJKoZIhvcNAQELBQAw",
    "ADAeFw0xODA0MTAxMzU1MTdaFw0xODA0MTAxNTU1MTdaMAAwggEiMA0GCSqGSIb3",
    "DQEBAQUAA4IBDwAwggEKAoIBAQCs2PX0fFSCjOemmdm9UbOvcLctF94Ox4BpSfJ+",
    "3lJHwZbvnOFuo56WhQJWrclKoImp/c9veL1J4Bbtam3sW3APkZVEK9UxRQ57HQuw",
    "OzhV0FD20/0YELou85TwnkTw5l9GVCXT02NG+pGlYsFrxesUHpojdl8tIcn113M5",
    "pypgDPVmPeeORRf7nseMC6GhvXYM4txJPyenohwegl8DZ6OE5FkSVR5wFQtAhbON",
    "OAkIVVmw002K2J6pitPuJGOka9PxcCVWhko/W+JCGapcC7O74palwBUuXE1iH+Jp",
    "noPjGp4qE2ognW3WH/sgQ+rvo20eXb9Um1steaYY8xlxgBsXAgMBAAGjNTAzMA4G",
    "A1UdDwEB/wQEAwIFoDATBgNVHSUEDDAKBggrBgEFBQcDATAMBgNVHRMBAf8EAjAA",
    "MA0GCSqGSIb3DQEBCwUAA4IBAQBUd9sGKYemzwPnxtw/vzkV8Q32NILEMlPVqeJU",
    "7UxVgIODBV6A1b3tOUoktuhmgSSaQxjhYbFAVTD+LUglMUCxNbj56luBRlLLQWo+",
    "9BUhC/ow393tLmqKcB59qNcwbZER6XT5POYwcaKM75QVqhCJVHJNb1zSEE7Co7iO",
    "6wIan3lFyjBfYlBEz5vyRWQNIwKfdh5cK1yAu13xGENwmtlSTHiwbjBLXfk+0A/8",
    "r/2s+sCYUkGZHhj8xY7bJ1zg0FRalP5LrqY+r6BckT1QPDIQKYy615j1LpOtwZe/",
    "d4q7MD/dkzRDsch7t2cIjM/PYeMuzh87admSyL6hdtK0Nm/Q",
    "-----END CERTIFICATE-----"
  ],
  "key": [
    "-----BEGIN RSA PRIVATE KEY-----",
    "MIIEowIBAAKCAQEArNj19HxUgoznppnZvVGzr3C3LRfeDseAaUnyft5SR8GW75zh",
    "bqOeloUCVq3JSqCJqf3Pb3i9SeAW7Wpt7FtwD5GVRCvVMUUOex0LsDs4VdBQ9tP9",
    "GBC6LvOU8J5E8OZfRlQl09NjRvqRpWLBa8XrFB6aI3ZfLSHJ9ddzOacqYAz1Zj3n",
    "jkUX+57HjAuhob12DOLcST8np6IcHoJfA2ejhORZElUecBULQIWzjTgJCFVZsNNN",
    "itieqYrT7iRjpGvT8XAlVoZKP1viQhmqXAuzu+KWpcAVLlxNYh/iaZ6D4xqeKhNq",
    "IJ1t1h/7IEPq76NtHl2/VJtbLXmmGPMZcYAbFwIDAQABAoIBAFCgG4phfGIxK9Uw",
    "qrp+o9xQLYGhQnmOYb27OpwnRCYojSlT+mvLcqwvevnHsr9WxyA+PkZ3AYS2PLue",
    "C4xW0pzQgdn8wENtPOX8lHkuBocw1rNsCwDwvIguIuliSjI8o3CAy+xVDFgNhWap",
    "/CMzfQYziB7GlnrM6hH838iiy0dlv4I/HKk+3/YlSYQEvnFokTf7HxbDDmznkJTM",
    "aPKZ5qbnV+4AcQfcLYJ8QE0ViJ8dVZ7RLwIf7+SG0b0bqloti4+oQXqGtiESUwEW",
    "/Wzi7oyCbFJoPsFWp1P5+wD7jAGpAd9lPIwPahdr1wl6VwIx9W0XYjoZn71AEaw4",
    "bK4xUXECgYEA3g2o9WqyrhYSax3pGEdvV2qN0VQhw7Xe+jyy98CELOO2DNbB9QNJ",
    "8cSSU/PjkxQlgbOJc8DEprdMldN5xI/srlsbQWCj72wXxXnVnh991bI2clwt7oYi",
    "pcGZwzCrJyFL+QaZmYzLxkxYl1tCiiuqLm+EkjxCWKTX/kKEFb6rtnMCgYEAx0WR",
    "L8Uue3lXxhXRdBS5QRTBNklkSxtU+2yyXRpvFa7Qam+GghJs5RKfJ9lTvjfM/PxG",
    "3vhuBliWQOKQbm1ZGLbgGBM505EOP7DikUmH/kzKxIeRo4l64mioKdDwK/4CZtS7",
    "az0Lq3eS6bq11qL4mEdE6Gn/Y+sqB83GHZYju80CgYABFm4KbbBcW+1RKv9WSBtK",
    "gVIagV/89moWLa/uuLmtApyEqZSfn5mAHqdc0+f8c2/Pl9KHh50u99zfKv8AsHfH",
    "TtjuVAvZg10GcZdTQ/I41ruficYL0gpfZ3haVWWxNl+J47di4iapXPxeGWtVA+u8",
    "eH1cvgDRMFWCgE7nUFzE8wKBgGndUomfZtdgGrp4ouLZk6W4ogD2MpsYNSixkXyW",
    "64cIbV7uSvZVVZbJMtaXxb6bpIKOgBQ6xTEH5SMpenPAEgJoPVts816rhHdfwK5Q",
    "8zetklegckYAZtFbqmM0xjOI6bu5rqwFLWr1xo33jF0wDYPQ8RHMJkruB1FIB8V2",
    "GxvNAoGBAM4g2z8NTPMqX+8IBGkGgqmcYuRQxd3cs7LOSEjF9hPy1it2ZFe/yUKq",
    "ePa2E8osffK5LBkFzhyQb0WrGC9ijM9E6rv10gyuNjlwXdFJcdqVamxwPUBtxRJR",
    "cYTY2HRkJXDdtT0Bkc3josE6UUDvwMpO0CfAETQPto1tjNEDhQhT",
    "-----END RSA PRIVATE KEY-----"
  ]
}

usage: "encipherment" | "verify" | "issue"

Purpose of the certificate. Default value "encipherment". Choices are:

• "encipherment": Certificate is used for TLS authentication and encryption.
• "verify": Certificate is used for validating TLS certificates from remote peer. In this case, the certificate has to be a CA certificate.
• "issue": Certificate is used for issuing other certificates. In this case, the certificate has to be a CA certificate.

certificateFile: string

File path to the certificate. If the certificate is generated by OpenSSL, the path ends with ".crt".

certificate: [ string ]

List of strings as content of the certificate. See the example above. Either certificate or certificateFile must not be empty.

keyFile: string

File path to the private key. If generated by OpenSSL, the file usually ends with ".key". Key file with password is not supported.

key: [ string ]

List of strings as content of the private key. See the example above. Either key or keyFile must not be empty.

When certificateFile and certificate are both filled in. V2Ray uses certificateFile. Same for keyFile and key.

SockoptObject

{
  "mark": 0,
  "tcpFastOpen": false,
  "tproxy": "off"
}

mark: number

An integer. If non-zero, the value will be set to out-going connections via socket option SO_MARK. This mechanism only applies on Linux and requires CAP_NET_ADMIN permission.

tcpFastOpen: true | false

Whether or not to enable TCP Fast Open. When set to true, V2Ray enables TFO for current connection. When set to false, V2Ray disables TFO. If this entry doesn't exist, V2Ray uses default settings from operating system.

• Only apply on the following operating systems:
  • Windows 10 (1604) or later
  • Mac OS 10.11 / iOS 9 or later
  • Linux 3.16 or later: Enabled by system default.
• Applicable for both inbound and outbound connections.

tproxy: "redirect" | "tproxy" | "off"

Whether or not to enable transparent proxy on Linux. Choices are:

• "off": Default value. Not enable TProxy at all.
• "redirect": Enable TProxy with Redirect mode. Supports TCP/IPv4 and UDP traffic.
• "tproxy": Enable TProxy with TProxy mode. Supports TCP and UDP traffic.

Transparent proxy requires Root or CAP_NET_ADMIN permission.